125Y Metal Perforated Plate Corrugated Structured Packing For
Separation Tower
Metal Structured Packing Introduction
Metal Structured Packing is made of perforated plate with channel
corrugation on surface, and remains structure feature of metal wire
gauze packing.
Metal Structure tower packing strengthens uniform liquid
distribution and surface wetting ability, which increases mass
transfer efficiency.Metal structured packing has feature of
specific surface large, void ratio high and weight light; Gas path
obliquity small and regular, pressure drop low; Radial diffusion
good, gas liquid contact sufficient.
Metal Structured Packing Technical Specification
| Model | Wire Gauze Structured Packing |
| Material | SS 304, 304L, 410, 316, 316L, etc. |
| Model | Specific surface | Bulk density | Void ratio | Obl. | ΔP | Theo. plate | HETP/mm | F factor m/s (kg/m3)0.5 |
| (m2/m3) | (kg/m3) | (%) | angle | (Pa/plate) | (piece/m) | | |
| 250AX | 250 | 125 | 95 | 30 | 100-400 | 2.5~3 | 100 | 2.5-3.5 |
| 500BX | 500 | 250 | 90 | 30 | 400 | 4~5 | 200 | 2.0-2.4 |
| 700CY | 700 | 350 | 85 | 45 | 600-700 | 8~10 | 333-400 | 1.5-2.0 |
| | | | | | | | |
| Typical Application | Absorption, scrubbing and stripping services |
|
| Package : | Carton box; wooden box |
| Warranty: | a) By National Standard HG/T 4374-2012; HG/T 21556.1-1995 |
| b) Offer lifetime consultation on problems occurred |
250(AX), Precision rectification for high productive capacity and less theoretical plate number.
500(BX), Vacuum rectification for thermosensitive system and hard separation system, especially
suitable for rectification with pressure lower than 7Kpa.
700(CX), Separation of isotopic compound and isomeric compound.
Metal Structured Packing Features
- Its high mass transfer surface area is suitable for close boiling
components distillation due to shorter columns.
- Its structured arrangement ensures no channeling of liquid and
requires minimum liquid redistribution.
- Due to its very low pressure drop, it is recommended for vacuum
distillation systems.
- It has higher vapour load capacity as compared to random packing
and trays.
- It provides low liquid hold-up.
Metal Structured Packing Application
Metal perforated Plate Corrugated Structured packing with high
flux, low resistance, high efficiency, the advantages of
anti-blocking ability. In distillation, absorption, and extraction
unit operation widely used, According to filler type, the minimum
diameter of 80- 200mm, maximum diameter reached 13m, density of the
liquid spray from 0.2-220m /m .hr, the pressure range from vacuum
to high pressure. Is used in chemical, fertilizer, oil refining,
petrochemical, natural gas and other industrial versatile and
efficient structured packing. Theoretical plate number of the
packing high flux, low pressure drop, low load, performance,
operating flexibility, amplifying effect is not obvious.
Used in fine chemicals, spices, isomer separation, difficult to
isolate system, heat-sensitive substances and products of high
purity distillation, separation has significant results.
Metal Structured Packing Application
About Our Company
